Company's Sawn Lake oil sands properties are located
within the Peace River oil sands area of Alberta
where the oil sands deposits are buried deep beneath
the earth’s surface and cannot be open pit mined.
These oil sands deposits can be developed by drilling
beneath the surface and using various in-situ recovery
methods to extract the oil sands. Because these
oil sands deposits must be recovered from beneath
the surface they leave a smaller environmental
surface footprint than open pit mining.
The Company plans to drill two horizontal wells along with two vertical observation wells on the North half of section 10 in order to conduct a Horizontal Cyclic Steam Stimulation (”HCSS”) production test. The HCSS process injects steam into the oil sands deposit through a horizontal well. Pressure then pushes the steam into the oil sands while the heat of the steam allows the bitumen to flow easier. As the steam soaks into the oil sands deposit, the heated bitumen flows back to the same well, which has been converted to be a producer and is pumped to the surface. This process or cycle is then repeated several times in the formation.
The Company is currently waiting on the preliminary results of the SAGD
Project to fine-tune our HCSS Project design before we initiate start-up operations.
For futher information on our HCSS Project click on and download the following brochure: